<<O>> Difference Topic
P13
(r1.14 - 26 Jan 2006 - Home.synoptic)
|
|
Added: |
> > |
Datalogging:
0043h - Interrupt Start
Which jumps to either 004bh or 00dbh... When writing your datalogging code put your code at 000dbh as that's the main section that's called... or use the vector pointer at 0020h to specify a new interrupt location...
SRBUF: 07dh
STBUF: 07ch
Checksum:
Disable checksum @ 0D22 909DF17F->03360D00
Memory Locations:
Here's a few memory locations for use with Boost or 2-step code to get you all started...
0aeh is 16bit RPM
0179h and 0289h is 8bit RPM (For use with VTEC)
0a4h is the map sensor
0dfh is the VSS
Extra tidbits...
Map sensor check @ 1f57h for use with Boost
CEL Stuff @ 1a4bh for MIL Shiftlight
Rev limit set locations @ 157dh for 2-step
AC Stuff @ 1b4dh for AC Cut |
|
Copyright © 2002-present by the contributing authors. All material on this collaboration platform is the property of the contributing authors, and is covered by the Non-Commercial Share-Alike License unless explicitly stated otherwise. |
|