The Oxygen Sensor measures oxygen content of the exhaust gases. Early Hondas used a 1-wire Oxygen Sensor but starting in the early 90's, a 4-wire sensor was used that included an integral heating unit in order to stablize the sensors readings. And begining with the 92-95 VX Vtec-E motor, a 5-wire Wide Band O2 sensor was fitted that also came on the 96-98 HX Vtec-E.
Joseph Davis had this to say about the 1 and 4 wire sensor readings: "O2 sensor: 14.7:1 AFR at 0.45 volts, anything higher is richer and anything lower is leaner - but noone can tellyou by how much. Stock O2 is calibrated for one thing and one thing only - stiochiometric."
- An lambda type oxygen sensor (sharp swing):
- Linear oxygen sensor output (wideband/special):
|
Copyright © 2002-present by the contributing authors. All material on this collaboration platform is the property of the contributing authors, and is covered by the Non-Commercial Share-Alike License unless explicitly stated otherwise. |
|