• Crank Angle Sensor? -

• Crankshaft Position Sensor - Determines timing for fuel injection and ignition of each cylinder and also detects engine speed.
• Top Dead Center Sensor - Determines ignition timing at start-up (cranking) and when crank angle is abnormal.
• Cylinder Position Sensor - Detects position of #1 cylinder for sequential fuel injection to each cylinder.

• Idle Air Control Valve - Or ''IAC'' Helps control idle

• Idle Air Control Valve / Electronic Air Control Vale - Or ''IAC/EACV'' Helps control idle

%META:TOPICINFO{author="blundar" date="1078361100" format="1.0" version="1.1"}% Sensors present on almost all honda motors:

• Crank Angle Sensor? -
• Engine Coolant Temperature - or ''ECT'' thermocouple input for engine coolant temperature
• Intake Air Temperature Sensor - or ''IAT'' thermocouple input for intake air temperature
• Map Sensor - Manifold Absolute Pressure Sensor, allows ECU to adjust Air Fuel Ratio based on density of intake air
• Oxygen Sensor - Measures oxygen content of exhaust gas
• Pressure Atmosphere - or ''PA'' or ''Barometric Pressure Sensor'' measures atmospheric pressure.
• Tps Sensor - Throttle Position Sensor
• Vehicle Speed Sensor - or ''VSS'' measures how fast axles are turning
• Idle Air Control Valve - Or ''IAC'' Helps control idle

Optional sensors:

• Electrical Load Detector - or ''ELD'' present in most US cars to measure how much electrical load there is
• Knock Sensor - A microphone-like device to listen for Pre Ignition, or knocking in DOHC Vtec motors.
• Pa Sensor - Atmospheric Pressure sensor
• Vtec Solenoid = solenoid to route oil flow to activate Vtec (on Vtec motors only :) )

• Maf Sensor